Preparing the remote control, 21 insert the battery, Esm (lithium battery) – Panasonic DVD-LV70 Manuel d'utilisation
Page 10: Replacing the button-type battery, Operation range, Power supply, Using the ac adaptor
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Preparing the remote
control
21 Insert the battery
esM (Lithium battery)
■ Replacing the button-type battery
The battery normally lasts for about a year.
Replace if the remote control fails to operate the
unit when used within the operation range.
Refer to “IMPORTANT SAFETY INSTRUC-
SIGNS” on pages 6 and 7.
Operation range
This figure shows DVD-LV75.
Remote control
signal sensor
About 7 m
(23 feet) in front
of the signal
sensor
• Do not expose the remote control signal sensor
to bright light.
•Do not place obstacles between the remote
control signal sensor and the remote control.
|B?|1 •Do not use another unit’s remote control at the
RQT
5897
S3me time.
Power supply
Using the AC adaptor
The [(!)] indicator lights.
Front of
this unit
Refer to “IMPORTANT SAFETY INSTRUC-
SIONS” on page 6.
The unit is in the standby condition (the
[Ci)] indicator lights) when the AC adap
tor is connected. The primary circuit is
always "live" as long as the AC adaptor
is connected to an electrical outlet.
■ When the unit is not going to be used
for a long time
The unit consumes 2 W when in standby
mode.
To conserve power, disconnect the AC
adaptor from the AC outlet.