Panasonic WV-BL730 - Manuel (Page 7)

(D Auto tris Lens Connector
This connector is used to connect with the auto iris
lens by a 4-pin male connector that is supplied as
a standard accessory (Part No. YFE4191J100).
(D Flange-back Adjusting Ring
This ring is used to adjust thé back focal length or
picture focus. Rotate this ring clockwise for a C-
mount lens or counterclockwise for a CS-mount
lens.
(D Lens (Option)
® Camera Mounting Screw Hole
This hole is used to mount the camera onto a
mounting, bracket.
(5) Down Button ( C3? )
This button is used to move the cursor downward.
It is also used to select items in the CAM SET UP
menu.
® Right Button ( )
' This button is used to move the cursor to the right.
It is also selects the mode and can be used to
adjust some levels.
® Left Button ( € 1 )
This button is used to move the cursor to the left. It
also selects the mode and can be used to adjust
some levels.
® Up Button ( (Bi )
This button is used to move the cursor upward. It
is also used to select items in the CAM SET UP
menu.
® Set Button (E^)
This button is used to activate an item selected in
the CAM SET UP menu.
® Gen-lock Termination Switch (Hi-Z, G/L 75Q)
Set this switch to Hi-Z when a gen-lock video input
signal is looped through. In all other cases, set this
switch to 75£2.
@ Power indicator
This indicator lights up when the power of this
camera is on.
<Q) Gen-lock Input Connector (GEN-LOCK)
; This connector is used to connect an external sys­
tem for synchronization.
-
5
-