Ag-am10/ag-am20 (opiton), Audio meter ag-am10, Audio meter unit ag-am20 – Panasonic VHS Hi-Fi Duplicator AG-6841Hp Manuel d'utilisation
Page 3: O audio level meter, E meter selector, Audio level adjustment
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

AG-AM10/AG-AM20 (Opiton)
Audio Meter AG-AM10
When this Audio Meter is installed onto the peak meter
section, it is used to set and confirm the audio input level. Use
the “Audio Input Level Controls” provided on the front panel of
this unit for adjusting.
This unti should be installed onto the VTR by an
authorized service personnel only.
Audio Meter Unit AG-AM20
This unit is a compact audio meter used to set and confirm
the audio input level of this unit.
It can easily be used only by connecting to the “To Meter Unit
Connector” provided on the front panel of this unit. Use the
“Audio Input Level Controls” for adjusting.
O
Audio Level Meter
The meter indication can be switched between Normal and Hi-Fi Audio by means of the Meter Selector,
e Meter Selector
This selector selects between Normal and Hi-Fi Audio for Audio Level Meter.
Audio Level Adjustment
Adjust the audio input of AG-AM10/AG-AM20 to indicate -8 dB when standard signal {1 kHz, -8 dBV) is input. Be sure to confirm before
using.
Without this unit, initial setting {audio level) of the VTR cannot be set.
The audio level of this unit is set to -8 dB.
;
J f 1
For details, refer to your authorized service personnel.