Recording procedure, Tips for better recording, Recording mode lock – Panasonic TL350 Manuel d'utilisation

Page 15: Recording check, Restoration-of-power-after-failure, Recording, Notes, Restoration-of-power-after-failure recording

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Recording Procedure

O

Switch on the power to the connected equipment. 0 Set the timer recording, auto repeat recording, alarm

©

. .. ^ *u *

i

recording or other recording

function.

Adjust

so that the images

of the video cameras

^

^

appear properly on the TV monitor.

© Select the time mode for the recording.

O Check that the date and time displayed on the TV O Press the REC button,

monitor have been adjusted properly.

O Insert a cassette tape into the unit after checking

that the tab on the cassette is intact.

Notes on operation

• If the PAUSE/STILL button is pressed during recording, the unit is set to the pause mode, and after about 5 minutes

in this mode it is transferred to the stop mode.

• Neat frame*to-frame continuity is not achieved if the recording mode is set again after the PAUSE/STILL button is

pressed during recording.

• When the MENU/REC LOCK switch has been set to OFF, other operations can be performed during recording.
• When restoration-of-power-after-failure recording is performed, recording can be continued in the same time mode

even if the power should fail provided that the power is restored within about one week. (This applies only if the

power has been supplied continuously for 3 or more days.)

• When performing auto repeat recording or timer recording, do not neglect to conduct the routine inspections.

• When recording images from a black-and-white camera, set the video signal mode on Menu Screen 4 to B_W.
• Remove the cassette tape if the unit is to be left standing for a prolonged period of time.

• When the power supply is interrupted during recording (with the power switch still ON), a non-recorded portion will

be made in the beginning of the tape travel, or the tape will be over-recorded at its ending section. But this is not a

malfunction.

Tips For Better Recording

In order to ensure greater reliability in monitoring, surveillance and other continuous operations lasting many hours,

this unit comes with some safety functions for recording. Read the following descriptions of these functions before
proceeding to operate the unit.

Recording mode lock

There are two ways, as described below, to maintain

the recording mode during recording by disabling the

operations of the power switch as well as the TIME

MODE and operation buttons.

O Set the MENU/REC LOCK switch to REC LOCK.

0

Set REC LOCK on Menu Screen 1 to ON. (See

Note)

The following button and connectors are operational

during recording even if the MENU/REC LOCK switch is

set to REC LOCK.
• Alarm input connector, alarm reset connector

• REC REVIEW

Recording check

When the REC CHECK button is pressed during

recording, the tape runs temporarily in the reverse

direction, and the recorded section is played back. This
function can be used to check the daily operation of the

equipment in the system.

Restoration-of-power-after-failure

recording

When a power failure has occurred during recording,
the unit automatically starts recording if the power is

restored within approximately one week.

• When the power fails, the tape “losing” safety pro­

tection function is activated to protect the video heads

and video tape.

Before power is restored

After power is restored

• Stop, play, last forward

Stop mode is established.

• Recording

Recording mode is

established.

• Auto rewind
• Auto rewind during

auto repeat recording

Unit is returned to the
mode applying before the
power failed.

Notes:

• When the power cord has come out of the socket or a

power failure has occurred, no operations will be

acknowledged for about 30 seconds after the power

has been restored: this is to protect the tape.

Once the recording mode is established, recording

cannot be released until REC LOCK on Menu Screen

1 is set OFF.

15

Advertising