Panasonic SC-HT280 Manuel d'utilisation

Page 43

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Problem

Probable cause(s)

Suggested remedy

Page(s)

Common Problems

Unit doesn’t come on.

The power cord plug is not fully Inserted.

• Confirm the plug is fully inserted.

-

Sound is not heard.

The speaker indicators are off.

• Turn on the speaker indicators.

20

The tape monitor function is on.

• Press the tape monitor button.

23

The muting function is on.

• Press the muting button on the remote

control.

28

Incomplete

or

incorrect

connection

to

speakers and external equipment.

• Check all connections.

10-15

The

incorrect

input

source

has

been

selected.

• Select the correct source.

20

Digital signals this unit cannot decode are

being played.

• Either have the player convert the signals

so this unit can handle them or switch to
ANALOG input.

20-21

Cannot play CD, OVD, or
TV.

The DIGITAL input mode is set to DIGITAL
or ANALOG.

• Change the setting to suit the type of

connection you have made.

20

Left and right sounds are
reversed.

The left and right speaker connections, or

source connections, are reversed

• Check all connections and correct them if

necessary.

10-15

Thin bass, tinny sound.

One of the speakers is connected out of

phase [(+)-(-), H-(+)l.

Recconnect

the

speakers

maintaining

proper polarity [(+)-►(+), (-)-‘(-)].

14-15

Sound suddenly stops or

none is heard when the
unit is switched on.

“OVERLOAD” appears on

the display.

The

protection

circuitry

has

functioned

because: the positive and negative speaker
wires have shorted: speakers with a lower
Impedance than this unit's rated impedance

are being used; the speakers are under

strain through excessive volume, excessive
power,

or

by

being

used

in

a

high

temperature environment.

• Switch off the unit, determine and correct

the cause, then switch the unit on.

• Use speakers with the right impedance

rating.

37

“F70” appears on the
display.

• Turn off the power and then turn it on

again, or disconnect the AC power supply
cord and then connect it to your household

AC outlet again.

(If “F70” remains on the display, consult an
authorized service center or your dealer.)

8

c

cc

RQT5307

Advertising
Ce manuel est liée aux produits suivants: