Panasonic SC-HT280 - Manuel (Page 30)

The remote control
This remote control can be used to operate this unit and some other Panasonic and Technics cassette decks, CD players, TVs, VCRs and
DVD players, provided they are equipped with a remote control sensor.
It is also possible to change-over the remote control code so that the remote control transmitter can operate TVs and VCRs which have not
been manufactured by this company page 36).
To operate the receiver
ROT5307
Point the remote control
toward the receiver
Basic operations
To turn the unit
ON/OFF
TUNER/
BAND 6
o
To select an input
source and switch the
remote control
to each operation
mode
TUNER/
TAPE VCR TV DVD CD BAND
o o o o oo
• PHONO can not be selected with this remote control.
• TAPE MONITOR cannot be controlled with the [TAPE] button.
To turn on the
STEREO mode
STEREO
O
To turn on the
SURROUND mode
SURROUND
O
To turn SFC on and
select the mode
Changes as follows each time the button
is pressed.
SFC
C
)
HALL — CLUB — LIVE —THEATER
r 1
L- SIM SURR (SIMULATED) —1
To output a test signal
TEST
( ) Press once more to stop the test signal.
To select the speaker
channel and adjust its
output level
When the SURROUND or SFC modes are on
LEVEL - +
O OO
To change the
surround channel
delay time
When the SFC modes are on
DELAY - +
0^00
To adjust subwoofer
output level
Changes as follows each time the button
SUBWOOFER is pressed.
LEVEL C~^
OFF— 5— 10—15—20—25
To change a step at a time
LEVEL - -1-
O o o
To mute the sound
level
The message “MUTING ON NOW” runs
MUTING repeatedly from right to left across the display
( ) as long as the muting function is on.
Press once more to return to the original
volume.
To adjust the volume - VOL -f-
OO