Cobra Electronics FRS121C - Manuel (Page 6)

6 English
Using Your Radio
Communicating with Another Person
•
To Talk To Another Person:
1. Press and hold the Talk button.
2. With the microphone about five (5) centimeters
(2 inches) from your mouth, speak in a normal voice.
3. Release the Talk button when you are finished
talking and listen for a response.
You cannot receive incoming calls while
pressing the Talk button.
Both radios must be tuned to
the same channel to communicate.
Channels
•
To Select a Channel:
1. With the radio On, select any of the 14 channels by
pressing the Channel Up or Channel Down button.
Both radios must be tuned to the same
channel to communicate.
Listening for a Response
•
When You are Finished Talking:
1. Release the Talk button to receive incoming
transmissions. Your microTALK ® radio is always in
Standby Mode while the Talk or Call buttons are not
pressed.
Volume
•
To Adjust the Volume:
1. Press the Volume Up or Volume Down button.
A double beep sound is used to indicate the minimum
and maximum volume levels (1 through 8).
Operation
Talk Button
5 cm (2 inches)
From Mouth
Channel Select
Listening
Volume Select
Volume Level