Cobra Electronics FRS121C - Manuel (Page 5)

Batteries
•
To Install or Replace Batteries:
1. Remove belt clip by releasing belt clip latch and
sliding clip up.
2. Pull up on the Battery Door Latch to remove the
battery compartment cover.
3. Insert four (4) AAA batteries. (Always use high
quality alkaline batteries.) Position batteries
according to polarity markings.
4. Replace Battery Compartment cover and belt clip.
Contact your local Cobra ® dealer or
Cobra ® directly for optional battery pack
and desktop charger accessories.
Turning On Your microTALK ® Radio
•
To Turn On Your Radio:
1. Press and hold the Power button until you hear a
series of audible tones indicating the radio is On.
Your microTALK ® radio is now in Standby Mode,
ready to receive transmissions. The radio is always in
Standby Mode except when the Talk or Call buttons
are pressed.
Battery Low
•
When battery power is low, the Battery Low
icon will blink. Your batteries should be replaced or
recharged, if using rechargeable batteries.
Battery/Power Saver
•
Your microTALK ® radio has a unique circuit designed
to extend battery life. If there are no transmissions
within ten (10) seconds, the radio will automatically
switch to Battery Save Mode. This will not affect the
radio’s ability to receive incoming transmissions.
5 English
Using Your Radio
Operation
On/Off Power
Battery Low
Insert Batteries
Pull Up Lock Tab
Remove Belt Clip