Hyloft Tire Loft Unit 01012 (red) - Manuel (Page 6)

Each Tire Rack can hold a maximum of 375 lbs (170 kg). Be sure to distribute the load evenly.
Verify all connections at least once per year in order to ensure that they are fastened securely.
INSTALLING THE SUPPORT SHELF TUBES
3
The smaller diameter tubes (C) are used as back support. Start by placing the smaller tubes at the
back of the rack at the appropriate height to protect the wall from tire rub. The two tubes slide together
and are fastened to frame (A) using the hex bolts (E) and washers (F).
The four larger diameter tubes (D) are used for the bottom shelf support on your tire rack. Slide the
tubes together and fasten to the frame (A) at the determined tire width so the tire sits deep enough to
stand upright. Fasten the tubes to the frame (A) using the hex bolts (E) and washers (F).
Fully tighten Lag Screws(B) in mounting plates using a 7/16" (11 mm) nut driver or socket wrench.
Adhere Sticker for convenient access to contact information.
Fully tighten lag
screws after
shelf tubes are
installed
Sticker