Hyloft Tire Loft Unit 01012 (red) - Manuel (Page 4)

Approximate Assembly Time: 30 minutes or less
1A
MOUNTING THE SIDE FRAMES
TO THE WALL STUDS
Using a stud finder, locate 2 wall studs that are 48" center to center apart. Using a pencil,
mark the top mounting hole centers 48" apart. Make sure holes are level and the
same distance from the floor. Pre-drill the 2 marked holes using a 3/16" (5 mm) drill bit.
1B
48"
Fasten Side Frames(A) to pre-drilled holes
(11 mm) nut driver or socket wrench making sure mounting plates are to the inside.
Do not fully tighten at this time. with 1 Lag Screw(B) in each using a 7/16"
Mounting
Plates to
the inside
Left
Right