Choose the dialing mode, If you aren’t sure of your dialing system, Charge the battery pack – Sony SPP-S9001 Manuel d'utilisation

Page 5

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Choose the dialing mode

For the telephone to work properly, select an appropriate dialing mode (tone or pulse).

Depending on your dialing system, set the DIAL
MODE switch as follows:

If your dialing
system Is

Set the switch to

Tone

T

Pulse

p

DIAL MODE
switch

If you aren’t sure of your dialing system

Make a trial call with the DIAL MODE switch set to T. If the call connects, leave the switch
as is; otherwise, set to P,

Charge the battery pack

Charge the battery pack for more than

12 hours

before you start using your phone.

1

Slide open the battery compartment lid of

the handset.

2

Insert the battery pack into the battery

compartment.

3

Close the batteiy compartment lid.

4

Place the handset on the base unit.

You can place either side facing up.

The CHARGE lamp lights up when the
handset is properly seated on the charge
terminals of the base unit. Charge the
battery pack for more than

12 hours

so

that the battery is fully charged. The
CHARGE lamp remains lit even after
charging is completed.

Advertising