Sony SPP-S9001 - Manuel (Page 10)

Speed dialing
You can dial with a touch of a few keys by storing a phone number on a dialing key.
Storing phone numbers
1
Press (PGM).
The TALK button flashes.
2
Press (SPEEDDIAL).
The dialing keys light up.
3
Press one of the dialing keys (I® to (9))
to store a phone number on.
You hear a confirmation beep.
4
Enter the phone number you want to store.
You can enter up to 20 digits, including a
tone and a pause, each of which is counted
as one digit.
5
Press (T gm ).
You hear a long confirmation beep, and the
number is stored. The TALK button goes
off.
Note
Do not allow more than 20 seconds to elapse between each step of the procedure.
Tips
• If you enter a wrong number, press (PGM). then start from the beginning.
• Use the supplied directory to write down what you stored on the speed dialing numbers.
To store a number to be dialed via Private Branch
Exchange (PBX)
Before entering a phone number in step 4, do as follows:
1 Enter the outside line access digit (e.g., 9).
2 Press (PAUSE).
To change a stored number
Store a new number, as described previously.
Making calls with speed dialing
1
Press (TALK) and wait until the TALK button lights up.
2
Press (SPEED DIAL).
3
Enter the desired speed dialing number ((o~) to (9)).
The phone number stored in the speed dialing number will be dialed.