While operating, some noise is heard – Sony TCM-4TR Manuel d'utilisation
Page 35
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Recording cannot be erased completely.
The erase head is contaminated.
СгОг (TYPE II) or metal (TYPE IV) tape is used.
Tape speed is too fast or too slow in the playback
mode.
Improper setting of the TAPE SPEED selector. Set
it to the same speed as that used for recording.
•> DPC is set at a point other than the center.
While operating, some noise is heard.
The counter reset button is pressed incorrectly.
Press it correctly to set to 000.
When the tape has reached the end after fast
forward or rewind, noise is heard.
The unit is not in stop mode. Press ■ STOP.
The sound is not normal when playing back a tape
other than a 4-track tape.
^ Set TAPE TRACK to 1-2.
-> You cannot play back a stereo-recorded tape with
this cassette-corder (see page 16).
35
EN