Output/input of analog video signals, Notes, Copyright precautions – Sony DVMC-DA1 Manuel d'utilisation
Page 20: On recording, Id-2 system, Cgms-d system
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Technical information (continued)
Output/input of analog video signals
Depending on the connection of VIDEO IN or S-
VIDEO connector, the output signal changes as
follows.
The input signal is coming from only the VIDEO IN
connector
■*
The signal is output from the VIDEO OUT connector, but
not from the S-VIDEO OUT connector.
The input signal is coming from only the S-VIDEO IN
connector
■*
The signal is output both from the VIDEO OUT and S-
VIDEO OUT cormectors.
The input signal is coming from both the VIDEO IN and S-
VIDEO IN connectors
-f The signal is output both from the VIDEO OUT and S-
VIDEO OUT connectors.
Notes
• When connecting to only the VIDEO IN connector, the
signal cannot be output to the S-VIDEO OUT connector.
• When connecting both the S-VIDEO IN and VIDEO IN
connectors, the S-video signal is automatically selected for
converting the digital video signal regardless signal type.
• For higher quality pictures, we recommend connecting
both the S-VlDEO IN and S-VIDEO OUT connectors.
Copyright precautions
On recording
When you play back video which includes copyright
protection signals and playback signals are input to
the media converter, the PROTECT indicator on the
media converter lights up. In this case. You cannot
record or capture the video output from the media
converter.
ID-2 system
This copyright protection system is used for the analog
connection. The lD-2 system is added to the ID-1 system.
CGMS-D system
This copyright protection system is used for the digital
connection.
20
'