Troubleshooting, Cannot turn on the media converter, No picture – Sony DVMC-DA1 Manuel d'utilisation
Page 18: Cannot record the picture, Two sound tracks coming from the speakers, Protect indicator is flashing, No sound
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Troubleshooting
Cannot turn on the media converter.
Make sure that the AC power adapter is connected to the
DC IN 6V connector of the media converter.
Make sure that the AC adapter plug is inserted correctly
into the wall outlet.
No picture
Make sure that the AC power adapter is connected to the
DC IN 6V connector of the media converter.
Make sure that all connecting cables are correctly
connected.
Press DV IN or ANALOG IN according to the input
signal.
Cannot record the picture.
The input picture includes a copyright protection signal.
In this case, you cannot record the picture (page 20, 21).
Block noise appears on the screen.Capturing images from
an analog video unit using a PC
Block noise may come from some DV units. This is not
malfunction.
Two sound tracks coming from the speakers.
When the sound recorded in 12- bit audio mode on the
DV unit is played back, you can listen to the combined
audio of both tracks. While holding DV IN, press
ANALOG IN repeatedly to select the desired mixing rate
(page 12).
After pressing POWER, no picture or sound is output for a
few seconds.
■> This unit begins operating 2 seconds after turning on the
unit. This is not malfunction.
After pressing DV IN, no picture or sound is output for a
few seconds.
■> This unit begins operating 1 second after pressing DV IN.
This is not malfunction.
PROTECT indicator is flashing
■♦This is not malfunction (page 20, 21).
No sound
-♦ Make sure that all connecting cables are correctly
connected.
■♦Change the mixing rate of the 12-bit audio mode (page
12
).