Creating your own program (program play), Creating a program on the player, Cdisc-20 – Sony CDP-CX70ES Manuel d'utilisation
Page 14: Playing cds
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Playing CDs
You can go to the next disc during 1 DISC Shuffle Play ^
Press DISC SKIP+.
-*Q' You can specify the next disc to play during 1 DISC
Shuffle Play
Turn the JOG dial to specify the next disc. After ail the
tracks on the current disc are played in random order,
the next disc starts playing. If you want to skip to the
next disc right away, press ENTER while playing the
current disc.
1
Press PROGRAM until the program number you
want (PROGRAM 1, 2 or 3) appears in the display.
If a program is already stored in the selected
program number, the last step of the program
appears in the display. When you want to erase the
whole program, hold down CLEAR until "ALL
CLEAR" appears in the display (see page 16).
2
Turn the JOG dial until the disc number you want
appears in the display.
Notes
• You cannot specify the next disc to play during ALL DISCS
Shuffle Play. -
• Even if you press ■ or turn off the player during ALL
DISCS Shuffle Play, the player remembers which discs/
tracks were played and which were not. Therefore, if you
want to start ALL DISCS Shuffle Play again from the
beginning, be sure to repeat the procedure from Step 1.
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks and/or discs to
create three different programs and programs are
stored automatically. A program can contain up to 32
"steps" — one "step" may contain a track or a whole
disc.
You can make programs using the controls on the
remote as well as ones on the player. However, the
programming procedures are different.
Creating a program on the player
PROGRAM KM/t»! ENTER
JOG
20
)|cDISC-20^
3
To program a whole disc, skip this step. Press
KK3/001I until the track number you want
appears in the display.
PPOORAkll
20
20
.a
Track number
4
Press ENTER or PROGRAM.
The track being programmed
PnOGRAMI
20
2Q ^
t
______________
i_
The disc being
programmed
Playing order
5
To program other discs/tracks, do the following;
To program
Repeat Steps
Other discs
2 and 4
Other tracks on the same disc
3 and 4
Other tracks on other discs
2 to 4
6
Press C> to start Program Play.
To cancel Program Play
Press CONTINUE.
14"