Troubleshooting, Severe hum or noise is heard, Recording cannot be done – Sony TA-E1 Manuel d'utilisation

Page 14: Additional information

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

I

Additional

Information

Troubleshooting

If vou experience anv of the following difficulties while
using the preamplifier, use this troubleshooting guide to

help you remedy the problem. Should anv problem

persist, consult your nearest Scin\’ dealer.

There's no sound or only a very low-level sound

is heard.

Check that all components are connected securely.

Make sure that you've selected the correct

component on the preamplifier.

The left and right sounds are unbalanced or
reversed.

^ Check that all components are connected correctly

and securely.

Severe hum or noise is heard.

^ Check that all components are connected securely.

^ Check that the connecting cords are away from a

transformer or motor, and at least 3 meters (10 feet)

away from a TV set or fluorescent light.

^ Move your TV away from the audio components.

^ The plugs and jacks are dirty. Wipe them with a

cloth slightly moistened with alcohol.

Recording cannot be done.

^ Check that the components are connected correctly.

^ Select the source component by rotating the

INPUT SELECTOR control.

14G6

Advertising