Sony HVL-ML20 - Manuel (Page 3)

laeniiiyiiiy t.11«; pcii t
.3
See illustration □
T] Power Switch
2] Buckle
3] Angle lock screw
4] Arm
5] Arm lock screw
6] Rear casing
7] Battery pack holder
8] Front casing
9] Guard
IS Front glass
01 Flalogen lamp
H 0-ring
Notes on the O-ring
See illustration [0
The O-ring assures the
waterproof function, (iii. ID-1)
® Rear casing
® O-ring
® Front casing
® Buckle
To maintain waterproof integrity, use the O-ring
correctly. Incorrect operation or attachment may
cause water to leak in.
Check that there are no
scratches or cracks.
(Ml.
ID-
2
)
® Crack
® Scratches
Scratches or cracks on the O-ring may cause water to
leak in. If there are any, replace the damaged O-ring
with a new one.
Do not remove the O-ring from the groove with a
metal tool or a tool with a sharp point.
Remove any dust, sand or hair
from the O-ring. (in. ID-3)
® O-ring
® O-ring groove
® Surface where the O-ring touches
® Dust sand
® Hair
Check that there is no dust, sand or hair on the O-
ring, or in the groove or on the surface where it
touches. If there is, remove it completely, or the O-
ring and the surface of the video light body may be
damaged and water may leak in.