Pre-recording check-list, After using the video light – Sony HVL-ML20 Manuel d'utilisation
Page 11
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Pre-recording check-list
Before di\ inj;, check if tile lij;ht c.in be turned on ,ind
go over the following checklist.
Item
Checkpoints
Battorv pack
• Fullv charged.
Bulb
• Not burnt out.
• Correctly plugged into the bulb
socket.
O-ring
• No scratches or cracks.
• No dust, sand or hair around it.
• Correctly set in the groox'e.
Buckles
• Correctly fastened.
After using the video
light
1 With the buckles fastened, thoroughly
wash the video light with fresh water.
2 Dry the video light and your hands so that
no moisture gets inside.
When opening the casing make sure your hands
are dry. Water dripping into the casings may
damage the video light.
3 Unfasten the two buckles.
4 Open the front and rear casings.
5 Remove the battery pack.