Taa board, Removing the taa board, Replacing the taa board – Dell Latitude E4200 (Late 2008) Manuel d'utilisation
Page 56
Back to Contents Page
TAA Board
Dell™ Latitude™ E4200 Service Manual
Removing the TAA Board
1.
Follow the procedures in
Before Working on Your Computer
.
2.
Remove the service panel (see
Removing the Service Panel
).
3.
Pull up on the TAA board to disconnect it from the system board.
Replacing the TAA Board
1.
Align the connector on the TAA Board with the connector on the system board, and press the TAA board into place.
2.
Replace the service panel (see
Replacing the Service Panel
).
3.
Follow the procedures in
After Working on Your Computer
.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE:
The Trade Agreements Act (TAA) board is optional and may not be present in some computers.
1
TAA board
2
system board
3
connector