Rockwell Automation 931S-A1A1N-DC Active Converter - Manuel (Page 3)

3
1. General instructions
• Disconnect power prior to installation
• Installation only by Qualified personnel
• Follow all applicable local and national electrical codes
For applications with high isolation voltages, take measures to prevent
accidental contact and make sure that there is sufficient distance or insula-
tion between adjacent devices!
Protective measures must be taken against electrostatic
discharges (ESD) when installing and setting 931S-A1A1N-DC.
2. Application
3 Way Active Isolators 931S-A1A1N-DC are used for galvanic isolation and
conversion of 0.4 mA and 10 V standard signals. Input and output signals
are factory set according to type. It is not necessary to adjust the
measurement range. The transmitted measurement signal is linear.
WARNING WARNING