WarmlyYours TW-ST-06PS-PL-HD Towel Warmer Studio - Manuel (Page 2)

Installation Support • No Nonsense™ Warranty • (800) 875-5285 • www.WarmlyYours.com
STUDIO TOWEL WARMER INSTALLATION MANUAL
ITEM# TW-ST-06PS-PL-HD
Push the long screw (4) through the bushing or
short tube (3), then screw into the plastic wall
anchor (5) or stud.
Use a hammer to install the plastic wall anchors
(5) completely into the wall, where needed.
Install the bracket onto the bushing or short tube (3).
As shown in the picture, screw the set screw (2) into the
hole of the bracket (1) with the hex wrench; tighten the
screw (1) into the bushing or short tube (3).
Attach the remaining three brackets by repeating step 11.
The installation is now complete. Wipe the tubes clean.
10
11
12
8
9
PAGE 2
INSTALLATION
TOOLS REQUIRED
(1) + (2) Round Wall hang bracket + set screw
(3) 3pc Bushings and 1pc short tube for wall bracket
(4) Long screw
(5) Plastic wall anchor
(6) Short screw
(7) Hex Key Wrench
1. & 2.
3.
+
4.
5.
6.
7.
ACCESSORIES