Regency Bellavista B36XTE Medium Gas Fireplace - Manuel (Page 58)

58 Regency B36XTE Foyer à gaz à évent direct
INSTALLATION
1) Remove glass door from unit.
2) If installed, remove top and bottom louvers.
3) Install lower trim piece just below the fi rebox as shown below.
4) Assemble top surround by securing top piece to side legs with 2
bolts and nuts and both sides - as shown below.
4) Install inner trim piece and secure with 4 screws in locations
shown below.
5) If installing the hearth piece, install pegs into the top of the
hearth and position under the inner trim in the center of the unit.
6) Install 2 top brackets on the wall 45-3/8" from the top of the
hearth (if installing) or measure from the fl oor if no hearth
installed.
7) Install the surround by hanging over the 2 installed brackets.
If installing the hearth piece - line up the outer edges of the
hearth and surround, before lowering.
OPTIONAL STEEL MANTEL INSTALLATION