Swiss+Tech BodyGard PTX 3-in-1 Manuel d'utilisation

Bodygard, Replacing the battery, Built-in quick release for immediate emergency use

Advertising
background image

Carry it on your key ring so it’s

always with you when you need it!

Attach the included Key Ring to your BodyGard

®

PTX

quick-release Seat Belt Cutter cover and secure the
unit to your key chain, so it’s with you whenever you
drive and wherever you take your keys.

For quick and easy access, you can also attach your
BodyGard

®

PTX to your vehicle’s rear-view mirror post

or driver-side sun visor arm, and even add an extra
one to the passenger-side sun-visor arm.

Replacing the battery

1. Loosen the set screw on the flashlight lens cover,

which is also the battery compartment. (The captive
screw is not removable.)

2. Using a small screwdriver in the empty Pull Tab slot,

gently pry the lens cover up and out.

3. Remove all three old batteries, shaking out any that

may be left in the product body.

BefoRe using, Remove Pull

TaB To aCTivaTe BaTTeRies.

Firmly tug Pull Tab to
remove from under
the light. Your
SwiSS+TeCh

®

BodyGard

®

PTX is

now operational.

Bodygard

®

PTX

Built-in quiCk Release

for immediate emergency use.

Grasp your BodyGard

®

PTX firmly, and with a sharp

tug, pull it away from Key Ring.

High-Carbon steel Components – long lasting!

Tough aBs Construction for rugged use.

limited lifeTime Warranty

This product is covered by a Limited Lifetime warranty to the
original purchaser in that this product is free from defects in
workmanship and materials. During the warranty period, this
product will either be repaired or replaced with a product of equal
or greater value, excluding any custom engraving or printing.
Damage through normal wear and tear (including battery expiration
and surface coatings), repair or alteration, misuse, abuse, neglect,
accident, improper storage and handling, fire, negligence, improper
cleaning, circumstances not directly attributable to manufacturing
defects, or act of God is not included.
ThiS wARRANTY iS iN LieU OF ALL OTheR wARRANTieS, eXPReSS
OR iMPLieD, iNCLUDiNG BUT NOT LiMiTeD TO, iMPLieD wARRANTY
OF MeRChANTABiLiTY OR FiTNeSS FOR A PARTiCULAR USe.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. Simply return your
SwiSS+TeCh

®

brand product postpaid and insured to:

Swiss+Tech Products

30725 Solon industrial Pkwy

Solon, Oh 44139 USA

US Patents 7,557,720, D575,182 and patents pending. Made in
China. SwiSS+TeCh

®

and BODYGARD

®

are registered trademarks

and FiRST iN KeY RiNG PRODUCTS™ is a trademark of Swiss+Tech
Products. Specifications are subject to change without notice.
©2010 Swiss+Tech Products, Solon, Oh 44139 USA

www.swisstechtools.com

800-414-8799

ST74059

6" x 9" trim

folds to 2" x 1.5"

BaTTeRY WaRnings:

multi-function emergency Tool

4. Stand up the lens cover/battery compartment on a

flat surface with posts facing up and tilted on the
flat edge. Stack three new AG10 alkaline button cell
batteries inside the compartment with the negative
side facing down. (See photo.)

5. Slide the BodyGard

®

PTX down over the lens cover/

battery assembly, taking care to align the flat sides.

6. Gently tighten the set screw until flush with the

lens cover surface. Do not overtighten.

These products contain button batteries.
IF SWALLOWED, batteries could cause severe
injury or death in just 2 hours.
SEEK MEDICAL ATTENTION IMMEDIATELY.

• DO NOT dispose of batteries in fire, batteries

may explode or leak.

• DO NOT mix old and new batteries.
• DO NOT mix alkaline, standard (carbon-zinc)

or rechargeable (nickel-cadmium) batteries.

• REMOVE BATTERIES from equipment which is

not to be used for an extended period of time.

seaT BelT CuTTeR

• Pull BodyGard

®

PTX away from key ring. This

exposes safety blade chamber.

• Place and hold outer edge of seat belt strap inside

blade chamber.

• Grasping BodyGard

®

PTX firmly, Pull blade quickly

across strap to cut completely.

2

automatic glass BReakeR

• Pull BodyGard

®

PTX away from key ring.

• Press barrel firmly against vehicle side window.
• Breaker point automatically deploys to break glass.
• Push out any remaining broken glass to escape.

leD flasHligHT

• To turn on the flashlight, press and hold with the

thumb on the end of the red button that is closest
to the LeD Flashlight. Release to turn off.

3

1

1

2

3

Seat Belt Cutter

Cover

insTall keY Ring BefoRe using

CauTion!

noTe

This is not a toy. Use in an emergency only.
intended only to break tempered automobile door
window glass during a vehicular accident. Product
will not break windshields or other windows made
of laminated glass.
To avoid injury and/or potential damage to the
product, we do not recommend testing on car
windows or hard surfaces. instead, test it on a
thick padded object, like a magazine or notepad.

intended only to cut seat belt webbing if a seat
belt does not unlatch during a vehicular accident.
Safety blade designed to prevent accidental or
intentional cutting. Blade type permitted on
aircraft (carry-on and checked) per USDhS,
TSA Rev. 12-1-2005.

Advertising