MARVEL Scientific MPRO6GARM - Manuel (Page 13)

NOTE
Figure 14
Figure 15
STORAGE COMPARTMENT SHELVING 6GARM AND MPRO6GARM
Loading Tips and Suggestions
Your product is equipped with a cantilever shelf system to pro-
vide you with maximum adjustability and customization options
through the purchase of aftermarket shelving.
The basic cabinet (6GARM)comes with 3 glass shelves which
can be positioned anywhere in the cabinet. The glass half shelf
allows storage of tall bottles or opened wine bottles on the shelf
below. (See Figure 14). The Professional Series (MPRO6GARM)
has 2 full width slide out shelves. The fixed wooden bottle cradle
at the bottom of the cabinet will hold 6 bottles of wine. The
wooden, bottom bottle cradle may be removed for storing “jug”
wines. Just remove the two (2) screws that secure the cradle to
the cabinet floor.
The bottles or cans on the top shelf directly under the light will
be exposed to a slightly higher temperature when the light is on.
Position your product accordingly and REMEMBER TO TURN OFF
THE LIGHT WHEN IT IS NO LONGER NEEDED.
13
Glass
shelves
Wine bottle
cradle
Tall bottle
storage area
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the unit. Grasp the shelf front with both
hands, rotate the front upward and lift out. (See Figure 15). To
install a shelf insert the shelf in the unit and insert the hooks into
the shelf support slots and drop the shelf down so the hooks
drop over the bottom of the slots.
To remove or reposition a slide out shelf (MPRO6GARM) model
it is easiest to remove the slide out shelf from the frame first.
(See Figure 16).
Rear tang
(hook) on
shelf
Shelf support
slot
Installed shelf
tang
Grasp the shelf by
the front
Make sure the shelf is secure
before loading the shelf.