Aquascape Ultra Pump (91005, 91006, 91007, 91008, 91009, 91010) - Manuel (Page 5)

ULTRA ™ PUMP SPECS
Model Number 400 550 800 1100 1500 2000
Item number #91005 #91006 #91007 #91008 #91009 #91010
maximum Flow rate 370 GPH 528 GPH 793 GPH 1110 GPH 1480 GPH 1982 GPH
maximum Head Height 7.55 ft 7.87 ft 9.19 ft 12.14 ft 16.4 ft 20.01 ft
motor type mag-Drive mag-Drive mag-Drive mag-Drive mag-Drive mag-Drive
Wattage 24 33 58 92 153 250
amperage .40 .55 .80 .85 1.46 2.60
Power cord length 12 ft 12 ft 25 ft 25 ft 25 ft 25 ft
Discharge Hose Diameter
1/2", 3/4", 1",
1.25"
1/2", 3/4", 1",
1.25"
1/2", 3/4", 1",
1.25"
3/4", 1", 1.25" 3/4", 1", 1.25" 3/4", 1", 1.25"
Warranty 3 Year limited 3 Year limited 3 Year limited 3 Year limited 3 Year limited 3 Year limited
5
www.aquascapeinc.com | ☎ CAN 1-866-766-3426 | ☎ US 1-866-877-6637
typiCal inStallation in a
pond or deCorative fountain
• The Ultra
™ pump is designed to be submerged directly into
the pond or decorative fountain container. to maximize pond
circulation, locate the pump as far away as possible from the
location of the water entering back into the water feature.
• The Ultra ™ pump is designed with a base that orientates the
discharge vertically. if space is limited or plumbing set-up
requires the discharge to be positioned horizontally, the
pump can be positioned on its side.
• It is recommended that the pump not be positioned in
the deepest area of the pond. this will protect the fish by
preventing the pond from completely draining in the case of
leak in the plumbing or filter. bricks or stones can be used, if
needed, to raise the pump up off the bottom of the pond.
• The Ultra ™ pump includes an assortment of fittings to choose
from. Select the appropriate fitting(s) needed for your
application. Slip the o-ring seal over the threaded portion
of the fitting.
• The Multi Hose Adapter will accommodate ¾”, 1”
or 1.25” tubing.
Pond with external filter
Decorative Fountain