Aquascape Ultra Submersible Pump (12100, 13500, 15100, 17500, 11000 & 11799) - Manuel (Page 2)

Congratulations on your purchase of this Ultra ™ submersible pump.
You will find this pump ideal for use in water gardens, ponds and to
power small ornamental fountains and statuaries. These pumps are
very energy efficient, using 50% less power than conventional pumps.
They are designed to be operated fully submerged and can be
operated in line. Made with environmentally friendly materials,
they are fish safe. The pumps are fitted with a pre-filter system to
prevent clogging and wear on the impeller. The motors are epoxy
encapsulated, not oil filled.
1) Features
• Fully submersible and energy efficient
• Powers ornamental fountains and statuary
• Prefilter system built in prevents clogging
• Fish safe, environmentally friendly materials
• KEEP THIS MANUAL–DO NOT THROW AWAY!
2) Installation
2.1 If a fountain is not required, connect hose directly to the outlet adapter and secure with
hose clamp.
2.2 Place pump in pond. If fountain is in use, ensure fountain head is above water level.
2.3 Plug pump cord into grounded outlet. Ensure cable is protected — keep away from
children and garden hazards. For proper operation, ensure that inlet is filled with water.
3) Maintenance
3.1 Remove pump from electrical supply.
3.2 Wash cage in fresh, running water. Never use chemical detergents when cleaning. Handle
filter sponge material carefully.
3.3 Remove impeller, inspect and clean in running water; replace if worn or damaged.
3.4 Reassemble pump; reconnect to electrical supply.
Maintenance notes:
• Check cord periodically for sharp bends and correct.
• If pump is taken out of service, flush with fresh water and allow to drain dry prior to storage.
4) Pump Performance
2
Ultra
™
Pump
Installation & Maintenance Instructions
Fountain and Statuary Pump
3
Model gph full open cord Length gph @ 2’ gph @ 5’ Max Head thread size Watts
350 gph 368 12’ 315 158 7’ 1/2” 35
500 gph 525 12’ 420 263 8’ 1/2” 40
750 gph 788 25’ 704 525 12’ 3/4” 45
1000 gph 1050 25’ 945 777 15’ 3/4” 50
1500 gph 1575 25’ 1355 998 22’ 3/4” 90
2000 gph 2100 25’ 1880 1523 25’ 3/4” 150
Scala/Scale
1:2
243
9,569
11
1
4,
38
0
12
8
5,
05
5
CAGE
BASE
CAGE NOSE
REAR BEARING
IMPELLER
O-RING
VOLUTE
Legenda/Legend:
-Tav. 1, ULTRA 2000;
-Tav. 2, ULTRA 1500
-Tav. 3, ULTRA 1000
-Tav. 4, ULTRA 750
-Tav. 5, ULTRA 500
-Tav. 6, ULTRA 350
Scala/Scale
1:2
243
9,569
11
1
4,
38
0
12
8
5,
05
5
CAGE
BASE
CAGE NOSE
REAR BEARING
IMPELLER
O-RING
VOLUTE
Legenda/Legend:
-Tav. 1, ULTRA 2000;
-Tav. 2, ULTRA 1500
-Tav. 3, ULTRA 1000
-Tav. 4, ULTRA 750
-Tav. 5, ULTRA 500
-Tav. 6, ULTRA 350
Figure 1
Pump 2000 GPH