Aquascape AquascapePRO 10000 Pump (20006) - Manuel (Page 8)


7) Care After Pump Operation
You don’t specifically have to care for this Aquascape pump, however, you are requested to
observe the following points after using the pump:
• If freezing temperatures are predicted and the pump is not in operation, remove the pump
from the water, wash with clean water and remove any debris or water in the impel-
ler chamber. Store pump in a bucket of water in a non-freezing location. This will help
prevent the seals from drying out on the pump.
• Our pumps are all 300 series s.s. or plastic components. No rust should be present.
.75”
Normal water level
Skimmer face plate
Proper Water Level with
respect to skimmer face:
Water level should be
about 3/4” to 1 1/2” below
the top of the skimmer
face opening
Pompe 10000
Fabriqué en Chine pour
Aquascape, Inc.
St. Charles, IL 60174 • Brampton,ON, L6T 5V7
www.aquascapeinc.com
POur Le MOdèLe:
• 10000
(Article #20006)
Produits de calibre professionnel Produits de calibre professionnel
directives d’installation & d’entretien
AQUA 10000 Pump Instructions 7-08 8 10/3/06 11:06:15 AM