Aquascape AquaJet 1000-1500 (99738, 99739 & 99740) - Manuel (Page 4)

4
2) Installation
2.1 Assembly
1) Screw the Divert Valve to the threaded body of the pump that protrudes out from the
central part of the upper shell Fig. 2.
2) Fasten the telescopic tube to the Divert Valve Fig. 2. In the AquaJet 1000 and AquaJet
1500 (equipped with the 2-1 Fountain Head) fasten the telescopic tube by screwing the ring
nut to the Divert Valve. If the ring nut is loosened you can direct the telescopic tube of the
AquaJet so that it is perpendicular to the water surface.
3) If you have the AquaJet 600 all you have to do is select the fountain head it is supplied
with and fasten it to the telescopic tube Fig. 3. If you have the AquaJet 1000 or AquaJet
1500 all you have to do is screw the 2-1 Fountain Head onto the telescopic tube.
Figure 2
Figure 3