Breville THE TEA MAKER BTM800XL - Manuel (Page 17)

17
BREWING TEA
10. Once the Basket reaches the bottom
of the Glass Jug, the LCD screen
will indicate the brewing progress,
automatically counting down in one
second increments. This is displayed as
the right figure on the LCD screen.
NOTE
If the Glass Jug is removed from
the Power Base during the brewing
cycle, the LCD screen will continue
to count down. The Tea Basket will
automatically return to the top of the
Glass Jug once the brew time has
elapsed and the Glass Jug is returned
to the Power Base.
11. At the end of the tea brewing cycle, the
Basket will automatically rise to the top
of the Glass Jug to prevent over-brewing.
The tea alert will sound three times. The
LCD screen will automatically display
the ‘Time Since Brew’ function. This
function counts up to a maximum of
60 minutes, allowing you to monitor
the freshness of your brew. It does not
activate the heating elements.
Selecting the ‘Keep Warm’ Feature
This feature allows the brewed tea or
heated water to remain warm for up to 60
minutes. The ‘Keep Warm’ temperature
ranges between 160-175°F depending on
the original brew temperature selected. The
lower the brew temperature, the lower the
‘Keep Warm’ temperature.
ORIGINAL BREW
TEMP.
APPROXIMATE
KEEP WARM TEMP.
160˚F - 180˚F 160˚F
185˚F 165˚F
190˚F - 212˚F 175˚F
NOTE
During the ‘Keep Warm’ cycle,
brewed tea will continue to develop
flavor. Depending on how long you
intend to keep the brewed tea warm,
you may consider reducing the initial
tea strength / brew time (see Page 16
and 21).
To activate the ‘Keep Warm’ feature:
1. Press the KEEP WARM button before,
during or after completion of the
tea brewing or water heating cycle.
The button surround will illuminate,
indicating the ‘Keep Warm’ feature has
been selected.
NOTE
‘Keep Warm’ will only maintain
temperature during the 60 minute
‘Time Since Brew’ feature at the end of
the ‘Tea’ or ‘Hot Water’ function.
2. Once the tea brewing or water heating
cycle is complete, the LCD screen will
automatically display the ‘Time Since
Brew’ count-up. The KEEP WARM
button surround will remain illuminated,
indicating the ‘Keep Warm’ cycle is
active for up to 60 minutes during ‘Time
Since Brew’ while the Glass Jug remains
on the Power Base.
3. During this time, the Glass Jug can
be removed from the Power Base,
however the ‘Keep Warm’ feature
will automatically switch off. You can
re-select the ‘Keep Warm’ feature by
pressing the KEEP WARM button. The
‘Keep Warm’ cycle will remain active
for the duration of the 60 minute ‘Time
Since Brew’ feature.
BTM800XL_IB_F11.indd 17 27/04/11 1:24 PM