Warning – Whirlpool WRF560SEYW Manuel d'utilisation

Page 5

Advertising
background image

5

Replace Drawer Front

1. Align the leveling/roller assembly with the holes on each side

of the refrigerator cabinet. Using the screws removed, reinstall
the assemblies to the cabinet base. Tighten the screws
completely.

2. Slide the drawer glides out of the freezer compartment. Insert

the screws in the top of the drawer front into the slots in the
drawer brackets. See Drawer Front Replacement graphic.

3. Pull the drawer brackets toward you to position the two

screws in the bottom of the drawer front into the brackets.
Completely tighten the four screws. See Drawer Front
Replacement graphic.

4. Replace the base grille.

Pull open the freezer drawer.

Align the three clips on the back of the base grille with the
three tabs at the base of the refrigerator.

Push the base grille in toward the refrigerator until it is
firmly in place.

Final Steps

1. Plug into a grounded 3 prong outlet.
2. Return all removable parts to doors and drawer and food to

refrigerator and freezer.

A. Tab
B. Clip

A

B

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,
fire, or electrical shock.

WARNING

Advertising