Control panel & features – Whirlpool WED5810BW Manuel d'utilisation

Page 5

Advertising
background image

5

CONTROL PANEL & FEATURES

POWER BUTTON

Press to turn the dryer on and off.

DRYER CYCLE KNOB

Use your Dryer Cycle Knob to select available cycles on

your dryer. Turn the knob to select a cycle for your laundry

load. See “Cycle Guide” for detailed descriptions of cycles.

START/PAUSE BUTTON

Press to start a cycle, or press once while a cycle is in

process to pause it.

OPTIONS AND SETTINGS
TEMP (for use with Manual Cycles only)

Select a drying temperature based on the fabrics in your

load. If you are unsure of the temperature to select for a

load, select the lower setting rather than the higher setting.
NOTE: The Air Dry Temp Feature is not available on the

Sensor Cycles.

DRYNESS LEVEL (for use with Sensor Cycles only)

Use the Dryness option to select dryness levels for the

Sensor Cycles only.

WRINKLE SHIELD™ Feature

When you are unable to remove a load of clothes from the

dryer as soon as it stops, wrinkles can form. The WRINKLE

SHIELD™ feature periodically tumbles, rearranges, and

fluffs the load to help keep wrinkles from forming.

Get up to 60/150 minutes for models with two choices,

90 minutes for models with only one choice of heat-

free, periodic tumbling at the end of a cycle. Press the

WRINKLE SHIELD™ button to turn ON or OFF at any

time before the cycle has ended.

TIME – MORE or LESS (for use with Manual Cycles

only)

Press MORE or LESS to add or subtract drying time.

1

2

3

CYCLE SIGNAL

The Cycle Signal produces an audible sound when the

drying cycle is finished. Promptly removing clothes at the

end of the cycle reduces wrinkling.
Press CYCLE SIGNAL until the desired volume (Loud, Soft,

or Off) is selected.
NOTE: When the Wrinkle Shield™ setting is selected

and the Cycle Signal is on, the tone will sound every

20 minutes until the clothes are removed, or the Wrinkle

Shield™ setting ends.

DAMP DRY SIGNAL (for use with Sensor Cycles

only)

Selecting the Damp Dry Signal will alert you when your

clothes are approximately 80% dry. This is useful when

you want to remove lightweight items in a mixed load to

avoid overdrying or remove partially dry items that may

need ironing.

DRUM LIGHT (on some models)

Select Drum Light to turn on the light inside the dryer drum.

When pressed during a cycle or not running, the Drum Light

turns on and will remain on until DRUM LIGHT is pressed

again, or the door is opened and closed, or the door is left

open for 30 minutes.
Press DRUM LIGHT at any time to turn the drum light ON

or OFF.

CYCLE STATUS LIGHTS

Lights shows the progress of the cycle the dryer is

operating.

ECO MONITOR

The Eco Monitor shows your estimated energy usage

based on the cycles and options used.

2

3

1

5

4

7

4

8

Not all features and options are available on all models.

Appearance may vary.

6

6

9

9

8

7

5

Advertising
Ce manuel est liée aux produits suivants: