Whirlpool WED5810BW - Manuel (Page 4)

4
CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW
Maintain good air flow by:
■ Cleaning your lint screen before each load.
■
Replace plastic or foil vent material with 4" (102 mm)
diameter heavy, rigid vent material.
■
4"
(102 mm)
Use the shortest length of vent possible.
■ Use no more than four 90° elbows in a vent system;
each bend and curve reduces air flow.
■ Remove lint and debris from the exhaust hood.
■ Remove lint from the entire length of the vent system at
least every 2 years. When cleaning is complete, be sure
to follow the Installation Instructions supplied with your
dryer for final product check.
■ Clear away items from in front of the dryer.
Good Air Flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying
times and improve your energy savings. See “Installation
Instructions.”
The venting system attached to the dryer plays a big role in
good air flow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
Use Sensor Cycles for Better Fabric Care and Energy Savings
Use the Sensor Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Sensor Cycles, drying
air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer shuts off
when the load reaches the selected dryness. The dryer will default to Normal Dryness Level to save energy.
With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to
over-drying. Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.
Good Better