Pioneer AVIC-F850BT - Manuel

Searching for your destination
by address
1
Display the “Destination”
screen.
2
Touch Address .
3
Select the country.
4
Input the destination infor-
mation.
Touch one of the options.
After narrowing down your
destination, the Location
confirmation screen will
appear.
5
Touch Go here .
When the route calculation is
completed, the Route confir-
mation screen appears.
6
Touch OK .
The navigation system pro-
vides route guidance both
visually and by voice.
If you want to cancel the
route guidance, touch on
the “Top Menu” screen.
Switching screens using the hardware buttons
Destination menu
1 Returns to the previous
screen
2 Searches for a location by
address
3 Searches for a facility by
name
4 Searches for a location from
the history or your registered
locations
5 Calculates the route to your
home
6 Searches for a nearby facility
7 Searches for a facility near
the destination
8 Searches for a facility in a
specified city
9 Searches for a location by
coordinates
Switching screens using the touch panel keys
Scrolling the map
1
Touch and hold a point on
the map in the direction
that you want to scroll.
The map moves in the touched
direction.
2
To slightly adjust the posi-
tion, touch Adju. first, then
touch the desired direction
arrow (eight directions).
Top Menu Map screen
AV operation screen
5 1 2 3 4
7 9
Top Menu
Edit/Settings screen
AV operation screen Destination screen Phone screen
Shortcut menu
Information screen AppRadio Mode screen
(Application menu screen)
Editing route screen
6 8
Basic hardware buttons
This guide is intended to guide you through the basic functions of this
navigation system. For details, please refer to the Operation Manual.
1 h button
Press to eject the disc.
2 VOL (+/–) button
Press to adjust the AV source volume.
3 MODE button
Press to display the AV operation
screen or AppRadio Mode screen.
4 HOME button
Press to display the “Top Menu”
screen.
5 MAP button
Press to display the map screen.
6 TRK button
7 button
Press to remove the detachable face-
plate from the navigation system.
AppRadio Mode screen
(Application menu screen)
Quick Start Guide
NAVIGATION AV SYSTEM
AVIC-F950DAB/AVIC-F950BT/AVIC-F850BT
© 2013 PIONEER CORPORATION.
All rights reserved.
<KMZZ13D>
<CRD4737-A> EU
English
• The example screens in this guide are from AVIC-F950DAB.
Actual screens may vary depending on the model used.
• Digital Audio Broadcasting is available on AVIC-F950DAB is available on AVIC-F950DAB
only.
Basic items on the map
1 Current time
2 Distance to the destination
(or distance to waypoint)
3 Estimated time of arrival
4 Next street name
(or next guidance point)
5 Next direction of travel
6 Current route
7 Current position
8 Phone menu key
Displays the “Phone” screen.
9 Current street name (or AV
information)
Switches between the cur-
rent street name and current
AV information.
a Map control
Sets the view mode and the
map orientation.
b Map scale
Changes the map scale.
1 3
5
4
6
7
a
9
b
2
8
Swipe action on the map
Operation guide
You can operate some navigation functions by
using a swipe action. To use the swipe action,
touch and hold the next direction of travel on
the map screen to display the operation guide.
Then, slide your finger toward the function
that you want to use on the operation guide.
Playing your iPod
You can operate your iPod by connecting it to the navigation system
using the USB interface cable for iPod (sold separately).
However, iPod source is not available when an iPod with Lightning
connector is connected to this navigation system. To play music
and/or video files on your iPod, install CarMediaPlayer on your iPod,
and then launch it while in AppRadio Mode.
1 Switches a source
2 Switches between the music
list screen and video list
screen
3 Displays the list screen
4 Recalls the equaliser curve
5 Sets the repeat playback
range
6 Sets shuffle playback
7 Switches between playback
and pause
8 Shows only the current
image
9 Changes the screen size of
the video
Video Music
9
8
Using the touch panel keys (iPod)
1 2 3
7 6 5 6 5
4 1 2 3 4
7
1
Activate the Bluetooth
function on your device.
2
Touch the keys in the fol-
lowing order on the “Top
Menu” screen.
l System Settings l
Bluetooth Settings
3
Touch Registration .
The system searches for and
lists nearby devices.
4
Touch your device name in
the list.
5
Enter the PIN code from
your device if required.
(The default code is 1111.)
6
Touch OK .
7
Select whether to transfer
your contacts if required.
8
Select whether to use the
Bluetooth audio device if
required.
9
Select whether your device
is an Android ™ device or
not.
If your device is an Android
device, (1) touch
Yes ,
(2) select whether to set your
device for the AppRadio Mode.
If your device is other than an
Android device, (1) touch
No ,
(2) select whether your device
is an iPod with Lightning con-
nector or not, (3) if your device
is an iPod with Lightning con-
nector, select whether to set
the device for AppRadio Mode.
10
Touch OK .
When the pairing is com-
plete, you can use the func-
tions.
Pairing your Bluetooth ® devices
You can use various additional functions (hands-free phoning,
Bluetooth audio and AppRadio Mode) by connecting your Bluetooth
devices to this navigation system. To use the functions, pair the
devices with the navigation system in advance.
Starting procedure
1
Touch the keys in the fol-
lowing order on the “Top
Menu” screen.
l App settings l App
connection settings
2
Select the type of OS in your
device.
3
Connect your device to
this product via the sepa-
rately sold cable.
If your device is an iPhone
with Lightning connector or
an Android device, proceed
to step 4.
4
Connect your iPhone with
Lightning connector or
Android device to this
product via the Bluetooth
wireless technology.
Using an application
1
Touch Apps on the “Top
Menu” screen.
The AppRadio app is
launched, and the AppRadio
Mode screen (Application
menu screen) appears.
2
Touch an application icon.
The application is launched,
and the AppRadio Mode
screen (Application operation
screen) appears.
3
Operate the application.
If the HOME button is
pressed while you are operat-
ing the application via the
navigation system, you will
return to the AppRadio Mode
screen (Application menu
screen).
Using AppRadio Mode
You can control applications for iPhone and smartphone directly on
the navigation screen (AppRadio Mode). To use the AppRadio
Mode, install the AppRadio app on the iPhone or smartphone
beforehand to enable launching of the application on the navigation
system. For details about the AppRadio app, visit the following site:
http://www.pioneer.eu/AppRadioMode
2
3
4
5
6
1
7
1
Touch the keys in the fol-
lowing order on the “Top
Menu” screen.
l Source Settings l
iPod Settings
2
Touch iPod Connection
Settings to “30-pin
Connector”.
3
Display the AV operation
screen.
4
Connect your iPod.
The source changes and
then playback will start.
5
Use the touch panel keys
on the screen to control
your iPod.
FIX_NX133_EU_QSG_CRD4737A_En_Fr.1-8 1-8 2013/04/10 11:57:43