Pioneer KRP-WM01 - Manuel (Page 9)

9
En
Product Requiring Professional
Installation
Thank you for buying Pioneer’s product.
Please read through the Operating Instructions to learn how
to operate your model safely and properly.
Please be advised to keep the Operating Instructions in your
place for future reference.
Notes on Installation:
• This product is sold assuming that it will be installed
by a qualified installation technician with the
required level of knowledge and skill. Always have an
installation specialist or your dealer install and mount
this product.
• Pioneer shall not be held liable for any damage
or injuries resulting from this product's improper
installation or mounting, improper use, modification,
or natural disasters.
SAFETY CAUTIONS
Handling in Case of Anomaly
If you detect an anomaly or fault, promptly have a qualified
technician perform repairs.
Installation
• This product is sold assuming that it will be installed by a
qualified installation technician with the required level of
knowledge and skill. Always have an installation specialist
or your dealer install and mount this product. Improper
installation may cause the product to break or fall.
• Select a location that is strong enough to support the
weight of the wall mount and display to prevent the
product from getting damaged or falling down. Some walls
may lack the structural strength required for mounting this
product, so consult with a qualified technician.
• Ensure that there is sufficient ventilation so that the
ambient temperature around the display does not exceed
40
°C Heat accumulation inside the display may cause
display failure.
• Do not block the ventilation openings of the display, as this
would cause heat to build up inside and may result in fire.
• Do not install this product in a location where people
may hang from it or lean against it, as this may cause the
product to break or fall.
• Do not install this product in a location where it will be
subjected to vibration or shocks, as this may cause the
product to break or fall.
• Do not install the display outdoors, at a hot spring, or near
a beach.
• Use of the display for a long time may cause discoloration
of the wall due to the heat of the display and the air flow.
• Follow the described assembly procedure and securely fix
the screws in all the specified locations. Failure to so do
may cause the display to break or fall.
• Loosening any of the screws may cause the display to fall,
so absolutely never loosen the screws.
• Do not mount the Pioneer display and television other than
specified, do not modify it, and do not use it for other than
its intended purposes, as this may cause it to break or fall.
• Be sure to implement double fall prevention measures to
be safe.
• In the case of a 60-inch display, always have three or more
persons on hand when installing the display. In the case of
a 50-inch display, have two or more persons on hand.
• Thoroughly read the operating instructions of the
Pioneer display and television for additional information
about installation locations, and be sure to follow this
information.
Usage Method
• Do not hang from or lean against the display, as this may
cause it to break or fall.
• The metal fittings inside the display, the wall mounting
parts, and other places hidden from sight may suffer
damage and cause the display to fall. Therefore, when
having the display inspected or repaired, or when
performing interior finish work at your shop, be sure to
have a qualified technician inspect these items. If possible,
have these items checked periodically.
• The metal fittings of the display may undergo changes due
to environmental factors when used for a long time, and
lose some of their strength as a result. After five years or
so, have a qualified technician inspect them to make sure
that they can safely continue to be used.
Before starting, switch off the power of the display and
peripheral devices, and disconnect all power plugs from the
power outlets.
Be careful not to get your hands caught when mounting and
removing the display.