NaceCare Solutions TT516 - Manuel (Page 3)

3
Fill using a hose, bucket or a suitable container. (Fig 5).
Please read before commencing any operation.
After the removal of all the packaging, carefully open and check the contents.
!
1
2
Using the handle position lever, move the handle into the
upright position. (Fig 1).
Fit the Brush / Pad (Fig 2).
Swing the floor-tool carrier from
behind the brush. (Fig 3).
4
3
5
Use the two locking knobs fitted to the floor-tool, secure to the
floor-tool to the floor-tool carrier. (Fig 4).
Fill the clean-water tank to a Max of 5 Gall
(see page 6)
For operation and cleaning controls
(see page 9)
Fig 1
Fig 2 Fig 3
Fig 4
Fig 5
Quick Set-Up Guide
!
0
Gall
Tip the machine.
(see Page 4)