Napoleon Fireplaces Swarovski - LHD50SS - Manuel (Page 39)

39
W415-0839 / D / 08.15.12
74.2A
Evenly spread the glass media onto the media tray, ensuring no glass media falls into the pilot opening. If this
happens, insert a clean bag into your vacuum cleaner and vacuum out the glass media. Replacement glass
can be purchased from your local authorized dealer / distributor.
CLEANING GLASS MEDIA
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild
dish soap, drain, rinse thoroughly and dry before placing around the burner.
CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE
THAT IT IS DRY.
DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF
REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED
DEALER / DISTRIBUTOR.
!
WARNING
6.3 MEDIA INSTALLATION
68 1/4”
9”
MIN
9”
MIN
36”
MIN
12”
MIN
40 1/2”
MIN
TO BOTTOM OF
APPLIANCE
The LHD50SS offers versatile
and unique installation
possibilities like the open
floor example shown here. A
dramatic artwork display can be
created to divide two separate
spaces, either in the middle
of the room or off to one side.
With Napoleon’s power venting
option, positioning the appliance
anywhere in the house or
building is attainable.
For framing and finishing the
enclosure see “ MINIMUM
CLEARANCES TO
COMBUSTIBLE ENCLOSURES”
and “INSTALLING CEMENT
BOARD” sections.
WARNING: The shaded
area must be framed and
finished with non-combustible
materials.
CLEANING CRYSTALS
T
o help maintain the luster and beauty of these crystals over time, carefully polish them by using a soft lint-free
cloth. If they become heavily soiled, you may use a mild detergent to wash them individually by hand, as you
would a fine chandalier. Please avoid rubbing the crystals together. Do not use a dishwasher.
6.4 UNIQUE INSTALLATIONS