Napoleon Fireplaces Vector 45 - LHD45 - Manuel (Page 37)

W415-0834 / E / 06.13.13
37
EN
7.0 OPTIONAL BLOWER INSTALLATION
!
WARNING
RISK OF FIRE AND ELECTRICAL SHOCK.
TURN OFF THE GAS AND ELECTRICAL POWER BEFORE SERVICING THIS APPLIANCE.
USE ONLY WOLF STEEL APPROVED OPTIONAL ACCESSORIES AND REPLACEMENT PARTS WITH
THIS APPLIANCE. USING NON-LISTED ACCESSORIES (BLOWERS, DOORS, LOUVRES, TRIMS, GAS
COMPONENTS, VENTING COMPONENTS, ETC.) COULD RESULT IN A SAFETY HAZARD AND WILL
VOID THE WARRANTY AND CERTIFICATION.
ENSURE THAT THE FAN’S POWER CORD IS NOT IN CONTACT WITH ANY SURFACE OF THE
APPLIANCE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE. DO NOT RUN THE POWER
CORD BENEATH THE APPLIANCE.
THE WIRE HARNESS PROVIDED IN THE BLOWER KIT IS A UNIVERSAL HARNESS. WHEN
INSTALLED, ENSURE THAT ANY EXCESS WIRE IS CONTAINED, PREVENTING IT FROM MAKING
CONTACT WITH MOVING OR HOT OBJECTS.
51.5
7.1 ACCESSING THE BLOWER
!
WARNING
BE CAREFUL NOT TO TEAR THE BURNER TRAIN GASKET. A REPLACEMENT GASKET CAN BE
ORDERED FROM YOUR LOCAL AUTHORIZED DEALER / DISTRIBUTOR.
7.1.1 BURNER REMOVAL
A. Remove the door, see “DOOR REMOVAL / INSTALLATION” section.
B. Remove the 20 screws (8 per side and each corner) that secure the media tray in place. Using the
lifting handles lift the tray up and out.
C. Remove the 4 screws that secure the burner in place. Lift the burner up and out.
MEDIA
TRAY
LIFTING
HANDLES
BURNER
HELPFUL HINT: Prior to fi nishing in the appliance, we recommend installing the blower through the
pre-fi nishing access panel.