Napoleon Fireplaces Madison - GD80 - Manuel (Page 33)

33
W415-0695 / D / 08.13.12
6.3 DECORATIVE BRICK PANEL INSTALLATION
A. Remove the hearth strip / screen assembly and glass
door. (Refer to leafl et).
B. Remove the andiron / grate assembly by removing the
2 screws located behind the andirons.
C. Remove the right log bracket, as shown. Note the
position of the securing screw in the bracket.
Install the right, left and centre hearth bricks into the
fi rebox, as illustrated. The hearth should appear seamless
across the front. Ensure that a ¼” space exists between the
hearth bricks and the perimeter of the burner.
D. Ensure that the tabs, located on the back wall of the
fi rebox, have been bent forward horizontally.
E. Install the panels in the following order:
A - RIGHT
B - REAR
C - LEFT
D - BAFFLE
NG NG
LP LP
LOG LOG
BRACKET BRACKET
ANDIRON ANDIRON
/ GRATE / GRATE
MOUNTING MOUNTING
SCREW ( SCREW ( X X 2) 2)
SECURING SECURING
SCREW SCREW
TAB TAB
LEFT LEFT
CENTR
E
CENTRE
RIGHT RIGHT
¼" ¼"
AIR AIR
SPACE SPACE
FRON
T HE
ARTH
FRONT HEARTH
A
D
B
C
RETAINER RETAINER
F. Secure the side panel using the retainers
located in the top
left and right corners of
the fi rebox.
G. Replace the components removed in steps
B - C.
H. Remove one end of the hearth assembly
so that the three front concrete hearth
pieces can
be inserted, then replace the
end.