Napoleon Fireplaces STARfire 52 - HDX52 - Manuel (Page 45)

45
W415-1276 / A / 05.09.14
EN
Refer to your burner manual which was shipped separate from the appliance.
A. Remove the 2 screws securing the brick panel brackets from the top left of the appliance.
B. Remove the left panel. NOTE: Care must be taken with the rear baffl e as it rests on the left and
right panels.
C. Remove the rear baffl e.
D. Repeat step (A) for the right side.
E. Remove the rear panel by lifting it up and out of the rear panel support.
A. Remove the 4 securing screws from the top / bottom left of the panel inside the fi rebox, remove the
panel.
B. Repeat on the right side.
C. Remove the 4 securing screws from the top and bottom of the rear panel and remove.
A. Vacuum the media from the appliance.
B. Remove the 4 securing screws from the burner media tray and lift up and out, refer to Figure 1.
C. Carefully lift the bottom media tray from the appliance, refer to Figure 2.
Fig. 2
Fig. 1
10.3 BURNER REMOVAL
10.4 BRICK PANEL REMOVAL
10.5 PORCELAIN PANEL REMOVAL
10.6 MEDIA TRAY REMOVAL (GLASS ONLY)