Agri-Fab 130 LB.Tow Spreader 45-04631 - Manuel (Page 4)

4
aSSeMBLY INSTrUCTIoNS
FIGUre 2
TooLS reQUIred For aSSeMBLY
(1) Hammer
(1) Pliers
(2) 7/16" Wrenches
(2) 1/2" Wrenches
Lay out and identify parts and hardware using the
illustrations on pages 2 and 3.
STep 2: (See FIGUre 2)
• Attach the hitch support tubes (3), and (4) to the hitch
tube using one 1/4" x 2" hex bolt (C) and 1/4" nylock
nut (J).
do not tighten completely.
STep 3: (See FIGUre 3)
• Insert plugs (AA) into the ends of the hopper support
tubes (5) and (6).
• Attach hopper support tube (5) and hopper support
tube (6) to the hitch support tubes as shown, using
two 1/4" x 1-1/2" hex bolts (E) and 1/4" nylock nuts (J).
do not tighten completely.
C
J
4
3
FIGUre 3
FIGUre 1
STep 1: (See FIGUre 1)
• Insert a plug (AA) into the end of the hitch tube (9).
• Attach the hitch bracket (8) to the hitch tube using two
5/16" x 1-1/4" hex bolts (G) and 5/16" nylock nuts (I).
Tighten.
• Install the hitch pin (A) in the hitch bracket and hitch
tube and secure it with the hairpin cotter (T).
G
A
T
I
AA
9
8
E
J
E
J
AA
AA
6
5
J
J
B
B
Y
7
STep 4: (See FIGUre 4)
• Insert the bushing (Y) into the cross brace (7).
• Attach the cross brace to the hopper support tubes
using two 1/4" x 2-1/2" hex bolts (B) and 1/4" nylock
nuts (J).
do not tighten completely.
FIGUre 4