Sony PCG-Z505SX - Manuel (Page 38)

VAIO Z505 SuperSlim Pro Notebook User Guide 28
To remove a Memory Stick card
Push the card in toward the computer. When the card comes out, pull it
out. The Memory Stick window closes automatically when you remove
the card.
✍
When the card's erasure prevention switch is set to LOCK, data cannot be recorded or
erased.
Before using cards, you should back up important data.
Wait a minimum of 10 seconds after the card finishes reading or writing data before
removing it. If the card is removed prematurely, a blue screen with an error message
appears, prompting you to continue or exit. Re-insert the card into the slot and press Enter
to continue. This allows the card to finish reading or writing data.
To avoid damaging data, do not:
❏ Remove a card or turn off the power while reading or writing data.
❏ Use cards in locations that are subject to static electricity or electrical noise.
Do not touch the card connector with your finger or metallic objects.
Do not attach labels other than the supplied label to a card.
Do not bend, drop, or apply strong shock to cards.
Do not disassemble or modify cards.
Do not allow cards to get wet.
Do not use or store cards in a location that is subject to:
❏ Extremely high temperatures, such as in a car parked in the sun
❏ Direct sunlight
❏ High humidity or places with corrosive substances
To prolong the life of cards, use the supplied storage case.
See the instructions that come with your card for more information on use.