Sony HVL-F43M - Manuel (Page 55)

Ad
v
a
n
c
ed
O
p
er
at
io
n
s
55 GB
[A] Wireless flash photography using
the HVL-F43M as the off-camera flash
Use only an off-camera flash unit, using the light from the built-in flash as a signal.
1
Attach the flash unit to the camera and turn the power
of the flash unit and camera on.
2
Set the camera to wireless flash mode.
• The setting method differs depending on the camera used. For details, refer
to the operating instructions of your camera.
• When the camera is set to wireless the flash is also set to wireless
automatically, and WL is displayed on the LCD panel.
The flash channel information is transmitted to the camera.
• The light level can be changed even for the wireless flash mode. For details,
see page 72.
3
Remove the flash unit from the camera and raise the
built-in flash.
• Make sure that the wireless remote mode display on the LCD panel of the
flash unit is [RMT] or [RMT2].
4
Set up the camera and flash unit.
• Set up the camera and flash unit in a dark location, such as indoors.
• See page 52 for details.
Built-in flash
HVL-F43M