Error displays/messages, 19 error displays/messages – Sony CDX-L510X Manuel d'utilisation

Page 19

Advertising
background image

19

Error displays/Messages

If these solutions do not help improve the
situation, consult your nearest Sony dealer.

Radio reception

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

The stations cannot be received.
The sound is hampered by noises.

• Connect a power antenna control lead (blue)

or accessory power supply lead (red) to the
power supply lead of a car’s antenna booster.
(Only when your car has built-in FM/AM
antenna in the rear/side glass.)

• Check the connection of the car antenna.
• The auto antenna will not go up.

t Check the connection of the power

antenna control lead.

• Check the frequency.
• When the DSO mode is on, the sound is

sometimes hampered by noises.
t Set the DSO mode to “OFF” (page 14)

Automatic tuning is not possible.

• The local seek mode is set to “ON.”

t Set the local seek mode to “OFF” (page

11).

• The broadcast signal is too weak.

t Perform manual tuning.

The “ST” indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set the monaural reception mode to

“ON” (page 11).

A program broadcast in stereo is heard in
monaural.

The unit is in monaural reception mode.
t Cancel monaural reception mode (page

11).

Error displays

The following indications will flash for about 5
seconds, and an alarm sound will be heard.

Err04

A CD is dirty or inserted upside down.
t Clean or insert the CD correctly.

Err99

The CD unit cannot be operated because of
some problem.
t Press the RESET button on the unit.

Messages

” or “

You have reached the beginning or the end of
the disc and you cannot go any further.

Advertising