Usb devices, Playing back a usb device – Sony CDX-GT575UP Manuel d'utilisation

Page 11

Advertising
background image

11

USB devices

• MSC (Mass Storage Class)-type USB

devices compliant with the USB standard
can be used.

• Backup of data to a USB device is

recommended.

• MSC (Mass Storage Class)-type Android™

Phone compliant with the USB standard
can be used.
Depending on the Android Phone, setting
the USB connection mode to MSC is
required.

Notes

• Connect the USB device after starting the

engine.
Depending on the USB device, malfunction or
damage may occur if it is connected before
starting the engine.

• Corresponding codec is MP3 (.mp3), WMA

(.wma), AAC (.m4a) and AAC (.mp4).

• For details on the compatibility of your USB

device, visit the support site on the back cover.

Playing back a USB device

1

Open the USB cover, then connect the
USB device to the USB port.

Playback starts.

If a USB device is already connected, to start
playback, press

 repeatedly

until “USB” appears.

To stop playback, press and hold

 for 1 second.

To remove the USB device, stop the USB
playback, then remove the USB device.

Notes

• Do not use USB devices so large or heavy that

they may fall down due to vibration, or cause a
loose connection.

• Do not detach the front panel during playback

of the USB device, otherwise USB data may be
damaged.

Changing display items
Press

.

Displayed items may differ depending on
the USB device, recording format and
settings.

Notes

• The maximum number of tracks is 10,000.
• It may take time for playback to begin,

depending on the amount of recorded data.

• During playback or fast-forward/reverse of a

VBR (Variable Bit Rate) MP3/WMA/AAC file,
elapsed playing time may not display
accurately.

• Playback of the following MP3/WMA/AAC

files is not supported.
– lossless compression
– copyright-protected
– DRM (Digital Rights Management) files
– Multi-channel audio files

Advertising