Removing an add-in card – Sony PCV-LX810 Manuel d'utilisation

Page 41

Advertising
background image

Removing, Installing, and Replacing Components

27

Removing an Add-in Card

1

Remove the system cover (see

“Removing the System Cover” on page 24

).

2

Disconnect any cables attached to the add-in card.

3

Remove the screw that secures the add-in card to the chassis, and set it aside
for future use.

4

Remove the add-in card from the PCI slot connector, and store the card in an
anti-static wrapper for future use.

!

Before opening the system unit, save and close all open files, exit all open

applications, turn off the power to all attached peripheral devices, shut down
the computer, and unplug the power cord.

Grasp the card with one hand on each end, and gently pull up as you rock the card
from side to side.

!

Hold the add-in card by its edges and do not touch any components or

connector contacts on the card. Static electricity in your body may
damage sensitive components on the card. As a precaution, touch any
exposed metal part on the metal chassis (preferably the metal part on
the power supply) before handling an add-in card to discharge any static
electricity in your body.

Advertising
Ce manuel est liée aux produits suivants: