Dimm configurations, L2 cache, Graphics – Sony PCV-LX810 Manuel d'utilisation

Page 104: Dimm configurations l2 cache graphics

Advertising
background image

VAIO Slimtop™ System Reference Manual

90

DIMM Configurations

L2 Cache

Graphics

DIMM1

*

* The PCV-LX810/PCV-LX910 is shipped with 128 MB of total memory. SDRAM is expandable to 512 MB.

Computer SDRAM is unbuffered DIMM, specification Rev. 1.0 or later. PCV-LX810/PCV-LX910 supports
SDRAM memory. PCV-LX810/PCV-LX910 does not support EDO memory or buffered DIMM memory.
Memory can be installed in either socket. Memory size can vary between sockets. DIMMs can be single- or
double-sided. DIMMs must be 3.3 V unbuffered 4-clock, 64-bit or 72-bit, 133 MHz SDRAM module. Use
only 133 MHz memory. Do not mix 100 MHz memory with 133 MHz memory.

DIMM2

*

0, 16, 32, 64, 128, 256

0, 16, 32, 64, 128, 256

Installed

256 KB secondary write-back cache (in processor), direct-
mapped organization, on-chip cache

Controller

SiS630 host bridge controller

Controller

*

* Supports DDC-1 and DDC-2b standards for Plug and Play displays.

SiS630 graphics hardware acceleration

Video memory

16 MB (uses system memory)

Resolution (displayed resolution depends on the graphics display you use)

True color (32 bits)

Up to 1600 x 1280 at 85 Hz non-interlaced

High color (16 bits)

Up to 2048 x 1536 at 70 Hz non-interlaced

256 colors (8 bits)

Up to 2048 x 1536 at 70 Hz non-interlaced

Advertising
Ce manuel est liée aux produits suivants: