Samsung DVD-F1080-XAA - Manuel (Page 18)

ENG- 18
C
O N N E C T I O N S
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 48 to 49)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using a Coaxial cable (not included), connect the DIGIT AL
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to
the DIGIT AL AUDIO IN (COAXIAL) jack of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO,
COMPONENT or HDMI OUT jacks on the rear of the DVD
player to the VIDEO, COMPONENT or HDMI-DVI IN jacks of
your TV as described on pages 12 to 16.
3
T urn on your DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select external
input in order to hear sound from your DVD player .
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Coaxial Cable
(not included)
Dolby digital or
DTS amp