Alignment and adjustments, Test mode, Service mode – Samsung DV50F9A8GVP-A2 Manuel d'utilisation

Page 3: Sensor bar touch data mode, Cycle count mode, Software version mode, Warning

Advertising
background image

3

TEST MODE

Continuous Run Mode:
1.
Press Mixed Load Bell + Dry Level for 7 sec during Power On State (Normal User Mode) .
2. Once in Continuous Run Mode, display “CC” for 1 sec and the number of Cycle for 1 sec and

the remaining time for 1 sec in turns.

3. The previous cycle will restart during Continuous Run Mode until the mode is deactivated.
4. During Continuous Run Mode, press Mixed Load Bell + Dry Level for 7 seconds to return to

normal user mode.

Service Mode

Definition of Service Mode
-

Dryer must be on before Service Mode can be entered.

-

Upon entry into Service Mode, the Sensor Bar Touch Data will be shown (Default Service

Mode).

How to Enter:
-

To enter Service Mode, press Mixed Load Bell and Temp Keys for 3 seconds, until it sends out

a beeping sound.

-

If pressing Mixed Load Bell + Temp Keys for 3 seconds in Service mode , it will return Normal

mode.

-

Even though entering Service mode, the operating cycle will not be influenced.

Sensor Bar Touch Data Mode

Definition of Sensor Bar Touch Data Mode:
-

This action will put the dryer into sensor bar touch data mode

-

Dryer will display Sensor Bar data. This mode is default mode of entering service mode

How to Enter:
-

With Power On pressing Mixed Load Bell and Temp Keys for 3 seconds

Cycle Count Mode

Definition of Cycle Count Mode:
-

This mode is to bring up the total number of cycles that User have carried out.

How to Enter:
- To enter cycle count mode press the Mixed Load Bell in Service Mode.

Software Version Mode

Definition of Software Version Mode:
-

It is to retrieve its software version

How to Enter:
-

At Service Mode, press Temp until it sends out a beeping sound

ex) In case of “U0 05”, U0 means major version “U0” 05 means minor version “05”
-

If press Temp key In Software Version Mode, it will return Service Mode.

ALIGNMENT AND ADJUSTMENTS

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before
servicing, unless testing requires power.

Mixed Load Bell

+Dry Level 7 sec

F900A DRY_DV50F_TECH MANUAL_DC68-03171D_EN(邀请翻译成法语).indd 3

2013-1-21 13:55:29

Advertising