STEINEL HFLUM2-120 - Manuel (Page 2)

Product Overview
120VAC
60Hz
HF
5.8 GHz
360°
Usage considerations
• When fl uorescent lamps are new or
at cold temperatures, the sensor may
detect gas moving inside the lamps.
In this case, switch the lights OFF and
reduce the reach setting.
• Use only high quality brand-name
lamps.
• Fixture confi gurations can vary
considerably. Since metal surfaces
refl ect high-frequency signals, the
detection pattern may vary from the
standard published coverages or
reach. Each fi xture design must be
tested for proper coverage accuracy.
• Consider the interaction between
various OEM components such as
ballast and lamp types. All components
should be tested for complete
compatibility as a system.
• The HFLUM2-120 is a UL/CUL
Listed open type device that requires
installation in a fi xture or listed junction
box or enclosure.
• One HFLUM2-120
• Installation Instructions
Needed for installation
• Two mounting screws
• Fixture or listed enclosure
Applications
• Wide variety of interior spaces
including offi ces, conference rooms,
classrooms
Intended uses
• For indoor use only
• Sensor mounts inside a lighting fi xture
Package Contents
Installation Overview
www.steinel.net (800) 852-4343
WARNING
• Turn power off at the circuit breaker before installing the sensor
• Sensor module must be installed and used in accordance with appropriate
electrical codes and regulations
• Installation by a qualifi ed electrician is recommended
Voltage
Load rating
Transmitter power
Power consumption
Time delay
Light level
HF System
Coverage
Dimensions
5 year warranty
UL and CUL Listed, RoHS Compliant
120 VAC, 60 Hz
0-600 watt incandescent, 0-150 watt magnetic or electronic ballast,
2 ballast, max 50uF
1mW
< 0.5W
30 sec to 30 min
.2 - 200 footcandles ; 2 - 2000 lux
5.8 GHz
360°, 3.3 to 26 foot reach
4.2 x 1.7 x 1.8 in; 107 x 42 x 44.5 mm
Product description
Specifi cations
The HFLUM2-120 is a line voltage
occupancy sensor module that installs in
a fi xture, adding energy saving lighting
control in each fi xture location. The
sensor uses STEINEL’s High Frequency
(HF) technology to turn lighting on and off
based on occupancy. Also, it holds lights
off when suffi cient daylight is present.
www.steinel.net (800) 852-4343
2 3
Fixture
integrated
Mounting tabs (2)
Light level, sensitivity, and time adjustments
Photocell
Sensor dome antenna
Wire terminations
1 2 3 4 5
2
1
3
4
5
The HFLUM2-120 emits high frequency
electromagnetic waves (5.8 GHz).
Movement in the controlled area causes a
change in the echo, resulting in detection.
HF sensors detect motion through many
materials, including panes of glass or
through the lens of a fi xture, enabling the
sensor to be hidden from view.
INST_HFLUM_newLayout_ENU-FRA.indd 4-5 INST_HFLUM_newLayout_ENU-FRA.indd 4-5 12.04.11 16:53 12.04.11 16:53